View topic - Cedar for canoe building

Can anyone help me find a B.C. or Alberta supplier for 18' 1x6 cedar boards to build a cedar strip canoe.
Thanks
Jim

_________________

 jkruse

If you haven't already you might want to try posting on the builders' forum at 'Bearmountain Boatworks'.

http://www.bearmountainboats.com/

cheers and have a great day

Try www.wcha.org

Wooden Canoe Heritage Association.

Lumber yard near me has that but its no help to you.

You can try the folks at orcaboats.ca in Port Moody. Rod Tait can probably advise you in some way, though I don't think he sells lumber directly.

The Bear Mountain Boats forum mentioned above is very good and the folks there discuss all aspects of building any canoe or kayak, not just the Bear Mountain models.

So, which canoe are you building?

Bryan

_________________
ColdspringPaddling.com

Almost forgot, Westcoastpaddler.com is a pretty good resource for the builders in B.C. (Mostly kayakers but don't hold that against them.)

_________________
ColdspringPaddling.com

Man, you're living in the land o' plenty out there. There's probably dozens of guys with small band mills who can custom cut what you need very reasonably.

You'd be surprised what a few hours on the phone will reward you with if you start asking around. Lots of these guys at least know about each other and can give you another name or number if they can't supply you themselves. I have developed quite a network of suppliers of various materials over the years by taking the time to follow leads. Unfortunately, everybody I know is on the East Coast.

There is one guy I met from Queen Charlotte named Maurice Roy. He used to deal in lots of construction grade western red cedar and Alaskan yellow. I mostly know him as a guitar wood dealer, but if you can get ahold of him he can probably steer you in the right direction if he can't help you. Sorry, no number right now, but I'll see if I can find his card.

_________________
“We can have great disparities of wealth or we can have democracy. But we cannot have both.” - Former Supreme Court Justice Louis Brandeis

Thanks for the sugestions everyone much appreciated.
I am planing to build a 16' Chestnut Prospector from Carrying Place Canoe Works plans.
Thanks
Jim

_________________

 jkruse

Blain(e?) Dieter in Dodge Cove (Prince Rupert) operates a sawmill speciallizing in boat grade red/yellow cedar and sitka spruce. Not sure of the phone number.

_________________
Cheers,

Aaron

Second on this page is a bit about Blaine Dieter. It has his email address on it, so I sent one.

http://dodgecoveartsguild.com/woodwork.html

_________________
-Jim-

"Paddle faster, I hear banjos!"

I got this prompt reply from Blaine Deiter. I had been asking him about shipping to Calgary.

_________________
-Jim-

"Paddle faster, I hear banjos!"